Reception counters and desks in Greenford Green

Yes. Greenford Green is on the patch, and the postcodes we work here are UB6. It is worked on our west London run, along with the rest of Ealing. Block paving bedded on sand can rut under a fully loaded van, and that is said to the customer beforehand rather than explained afterwards. A commercial frontage rarely has anywhere to stop, so the unload is timed rather than assumed and the counter pieces come off first. The transaction shelf can wait on the van; the counter cannot. You never have to visit anything or collect anything: we template in your kitchen and fit in your kitchen.

An inter-war terrace is wider than a Victorian one and shallower than a semi, so the kitchen is a compact square room rather than a galley. The carcass is built around a chimney breast or into a bay, so the counter is drawn to a shape the joiner had to invent rather than to a rectangle, and the return between the upper counter and the transaction shelf rarely nests neatly against the long piece. Clinic counters carry a card reader and a screen at the low level. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. A counter is worse off than a kitchen here, because it usually stands clear of the wall and has nothing behind it to hide a gap. Stone will not straighten joinery, and it will not forgive it either.

A short hard approach with no steps means a full-length piece can be walked in flat by two people rather than turned up on edge. A counter top is one long piece with no run of cabinets to break it, so the route decides the join count before the sightlines get a vote. The upper counter is the piece that has to make the turn. Where the drive is shared, the half-hour the van spends in the way is agreed with the neighbour in advance rather than apologised for at the time. Loading bays belonging to the building are booked by whoever holds the lease, and that is seldom whoever ordered the counter. Nothing is stood anywhere on a pavement it could be knocked from.

Not especially, and pretending otherwise would be simple enough. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop installation. It is a fact about the local housing rather than about the work. The job is quoted, cut and fitted the same way wherever on the patch it lands. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Counters are nearly always one-offs, so the saving that comes from repeating a specification is not usually on the table here. One visit, because a lobby cannot be closed twice. Extension work runs late far more often than it runs early, and the worktop is close to the last thing in, so the date agreed at the start is rarely the date that happens. Where an operator is fitting out several receptions, the counters come off one slab run so the desks read as a set rather than as neighbours. One counter, one drawing, and no second bite at it.

An aisle under a metre stops being a working space the moment two people are in it, and the depth of the tops either side is what decides whether that happens. A counter has the same argument in miniature: a straight run nests kindly on a slab, and every return costs yield. External corners on a counter are mitred, never butted. Supply only, material is £110 to £550 per square metre, with templating, fabrication and fitting quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. What a counter is scribed to is the joiner's carcass rather than the plaster, which is why it is templated after the carcass is fixed and never before. The front edge runs straight whatever the wall behind it does. Confirm whether the reception is at ground level or up the stair, and send the carcass drawing with the chimney breast and any bay recorded on it. Because the money comes out of a household rather than a maintenance budget, phasing is common: tops now, island or splashbacks later, quoted so the second visit still matches the first. The same split runs through commercial property: a landlord fitting out a shell and a tenant fitting out their own reception want different things from one counter. Approval in writing before a slab is committed to a desk.

A finished join is typically two to three millimetres, colour-matched and sanded flush. What you get is a line rather than a step, because the pieces are levelled to each other first. Join count and position are settled from the template drawing rather than improvised on the fitting day. A dishwasher door on one side and an oven door on the other cannot both stand open in a narrow aisle, so which appliance goes where matters more in this shape than in any other. The return between the high counter and the low shelf never nests neatly, and it is what decides how much slab the desk swallows. The knee recess removes the leg the span was relying on.

Units have to be fixed down as well as levelled. A loose carcass moves under stone. Levelling belongs in the carcasses, on their own legs and packers. Small variation is taken up by packing under the top on the fitting day. A live soil stack cannot be chased back into the wall, so the depth it steals is permanent and the run is planned around it rather than through it. A lobby wall that leans shows itself along the back return, so that edge is cut to the line the wall actually takes. Where the plaster bows, the counter is drawn away from it.

A join added to get stone into the room is a different thing from a join added because the slab ran out, and the quote says which is which. Splitting a run costs a join, and that is the price of getting stone into the room at all. Where there is a lift, whether it can be booked out and padded matters as much as its size. Where the van stands level with the front of the house a piece gets handled twice instead of five times, and stone breaks on handling rather than on the road. The lower transaction shelf is short and easily handled; it is the upper counter that has to be walked in on edge and turned at every corner. Trestles go up in the lobby before anything is unwrapped.

The quote is written from the template drawing. Before that it works from what you have described. Two kitchens the same length can be far apart, because material, edge and cut-outs move independently of size. Cut-outs, edge profile and join count are itemised, so taking one out removes a line rather than starting an argument. Boxing built in plasterboard on a light frame will take no useful fixing, so nothing bears on it and the stone is carried off the carcasses either side. Where the floor falls away across a lobby the carcass is packed level first, because the top cannot correct anything sitting under it. A shadow gap solves what a scribe cannot.