Worktop installation in Greenford

Yes. Greenford is on the patch, and the postcodes we work here are UB6. It is worked on our west London run, along with the rest of Ealing. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The chimney breast in the corner has usually been left in place, so the run gains a return and two scribed ends. Access is usually the easy part here, as most of these have a side gate and a back door straight into the kitchen, so we carry down the side alley rather than through the house and keep the mess outside. Walked, measured, protected, then lifted. The gas run and meter box sit on the kitchen flank wall in these semis, so the units get packed off the wall and the top has to be templated to that packed line.

Western Avenue makes delivery easy and the residential roads are wide with drives. The Greenford roundabout and Ruislip Road are the congestion points. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. Floors and units are protected before anything comes through the door, communal or otherwise. One visit, our own installers.