Worktop installation in Perivale

Yes. Perivale is on the patch, and the postcodes we work here are UB6. It is worked on our west London run, along with the rest of Ealing. A controlled parking zone means either a visitor permit sorted in advance or a suspended bay, and a suspension is applied for days ahead rather than on the morning. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original brickwork is uneven by ten millimetres or more across a bay, so the back edge is scribed to the actual face rather than to a line. These read as easy from the outside and rarely are. Walked, measured, protected, then lifted. The Deco conversions have deep window reveals and non-standard ceiling heights, so set the splashback height off the actual reveal rather than the architect's drawing.

Western Avenue runs straight through with limited turnings, so overshooting means a long loop. Residential streets have drives, but the converted-factory apartments need lift booking and residents' permits. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop splashbacks & upstands. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Confirm loading bay access and lift booking with the building's management, and clear any furniture from the mezzanine stairs or split-level approach. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.