Worktop templating in Greenwich Peninsula

Yes. Greenwich Peninsula is on the patch, and the postcodes we work here are SE10. It is worked on our south east London run, along with the rest of Greenwich. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. Two hours is the realistic figure. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. Where a column, downstand or steel plate lands in the run, the template plots its actual outline so the stone is cut to fit around it instead of being stopped short and filled. No stone is ever cut from a plan. Measure the service lift diagonal first, a 3m piece that won't stand up in the car has to be jointed, and that joint has to land somewhere defensible.

Everything goes through a loading bay and a goods lift on a booked slot, with floor and lift protection and a concierge who wants notice; the lift car dimension, not the front door, decides maximum slab length. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. A template taken without walking the route produces a drawing that cuts beautifully and will not go in. The template records it along with everything else.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. Units fitted, fixed and level first.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Exposed structure means the back edge is not a straight line at all, and a scribe of fifteen or twenty millimetres across a run is normal. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Units fixed and levelled, all steelwork and brick cleaned, sealed and finished, and any boarded sections completed to final thickness so the template picks up the surface the stone will actually meet. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. The template happens when the units are in, fixed and level, whoever is fitting them. No stone is cut from a plan.