Kitchen worktops in Greenwich Peninsula

Yes. Almost entirely developer-fitted open-plan kitchens in apartments, one wall run plus an island or peninsula facing the living space, typically 2.6m to 3.4m, in thin laminate or budget composite that owners replace at ten to fifteen years. Layouts repeat floor to floor, so one template often covers several flats in the same block. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised.

2000s Millennium Village housing, 2010s-2020s high-rise apartments and riverside warehouse conversion. Poured screed over steel decking can fall away across a long run, so level is checked across the whole room before anything is packed. Exposed brick and steel is the whole job here: the brick face is not a flat plane, it moves in and out over its height and along its length, so the scribe is taken at the exact height the worktop will sit rather than off the wall generally. Recorded as it is, not as it was drawn.

Everything goes through a loading bay and a goods lift on a booked slot, with floor and lift protection and a concierge who wants notice; the lift car dimension, not the front door, decides maximum slab length. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

Worktop replacement, worktop templating and worktop splashbacks & upstands, in that order. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first. Measure the service lift diagonal first, a 3m piece that won't stand up in the car has to be jointed, and that joint has to land somewhere defensible.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Exposed structure means the back edge is not a straight line at all, and a scribe of fifteen or twenty millimetres across a run is normal. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The template happens when the units are in, fixed and level, whoever is fitting them. No stone is cut from a plan. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.