Worktop fabrication in Hackney Wick

Yes. Hackney Wick is on the patch, and the postcodes we work here are E9. It is worked on our east London run, along with the rest of Hackney. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Poured screed over steel decking can fall away across a long run, so level is checked across the whole room before anything is packed. The kitchen is open plan and the island is often long enough to need a join, and it sits in the middle of the room where every edge is visible, so the join goes over a gable and usually under the hob line where the eye does not follow it. The bench proves it before the van moves. Walls in these converted units are rarely plumb and often bare brick, so an upstand shows every undulation and a separate stone splashback scribed to the wall works far better.

Narrow lanes between the canal and the railway, gated yards, and buildings designed around goods vehicles rather than parking, a few still with loading doors and hoists. Newer blocks have booked service lifts while the older conversions can mean a long industrial stair. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. It is settled on the bench, not on site.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop design & quotation. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Same slab run, or it is not a match. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Pieces are dry-assembled and checked on the bench before anything is loaded. Proven on the bench before dispatch.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. The bench proves it before the van does. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. The drawing decides it, not the fitter. The island layout, including whether the ends are mitred down to the floor, needs settling before cutting, since mitred ends are cut in sequence with the top and dry-assembled as one unit. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction.