Worktop fabrication in Lea Bridge

Yes. Lea Bridge is on the patch, and the postcodes we work here are E5. It is worked on our east London run, along with the rest of Hackney. Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. Pieces are loaded in reverse fitting order so the first thing off the van is the first thing that goes down. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The classic arrangement is the original back room with a later extension bolted onto it, so the kitchen is two ages of building in one room. Most of these have a side passage and a back door, so a full-length piece can usually reach the kitchen without being cut down, and the piece sizing is driven by the slab rather than the route. The bench proves it before the van moves. On the interwar semis the side gate and a level path to the back door is the best route anywhere in Hackney, so use it and keep the tops in longer pieces.

Lea Bridge Road is a wide fast corridor with bus lanes and limited stopping, but the residential streets behind have driveways and side gates on the semis, which makes the carry one of the easiest in the borough. Estate blocks still need lift access arranged in advance. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. The maximum piece length is fixed at drawing stage and every join is placed over a cabinet gable from there. Once the cut-outs are machined there is no going back on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. So the nesting is planned around it rather than around a standard kitchen. Same slab run, or it is not a match. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Pieces are dry-assembled and checked on the bench before anything is loaded. Nested for the job in front of us.

Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. Pieces are dry-assembled on the bench before dispatch so the corners are known to close before they leave the workshop. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. Machined to the real line. The peninsula end detail needs deciding up front - square edge, mitred apron down the end, or a full waterfall - because a waterfall end has to be cut in sequence off the same part of the slab as the top. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. Changing an appliance after the nest is set means recutting the piece, not adjusting it. The approved drawing is the instruction.