Worktop installation in Hackney Wick

Yes. Hackney Wick is on the patch, and the postcodes we work here are E9. It is worked on our east London run, along with the rest of Hackney. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Poured screed over steel decking can fall away across a long run, so level is checked across the whole room before anything is packed. The goods lift is often industrial and generous, but the flat entrance and any internal turn into a mezzanine or split level can be tighter than anything in the building, so we walk the full route with a tape before unloading. That is the shape of the day. Walls in these converted units are rarely plumb and often bare brick, so an upstand shows every undulation and a separate stone splashback scribed to the wall works far better.

Narrow lanes between the canal and the railway, gated yards, and buildings designed around goods vehicles rather than parking, a few still with loading doors and hoists. Newer blocks have booked service lifts while the older conversions can mean a long industrial stair. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop fabrication. Same template visit, same workshop, same installers either way. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Confirm loading bay access and lift booking with the building's management, and clear any furniture from the mezzanine stairs or split-level approach. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.