Worktop installation in Victoria Park

Yes. Victoria Park is on the patch, and the postcodes we work here are E9. It is worked on our east London run, along with the rest of Hackney. Enforcement zones rarely accept a trade van unloading stone as an exemption, so this gets sorted before the date is confirmed rather than argued about afterwards. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. Both visits happen in your kitchen, the template and the fit, so there is nothing to visit and nothing to collect.

Sash windows in the addition sit low and the sill can land under standard worktop height, so the top is notched round it or the run stops short of it. The day is planned backwards from the hall. A dry-lined wall hides a void, and the void gets bridged. A room can be out of square in both directions at once, so the wall that leans is also the wall that runs downhill, and one scribe cannot answer both. Rushing that is what leaves a gap you look at every morning for fifteen years. Level is checked across the room, not along one wall.

Where the garden is level and the back door is wide the pieces get staged outside on trestles and brought in one at a time as the fitters are ready for them. The fitting day is planned backwards from that point, before anything comes off the van. The hall is cleared before the first piece comes off the trolley. Visitor permits are issued to the household rather than to the trade, so the ones the day needs come from the customer and are best in hand the week before. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather ask than guess.

One of the three we are asked for most, although worktop fabrication is asked for more. Same template visit, same workshop, same installers either way. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The fitting day is scheduled to suit that rather than to suit the diary. One kitchen out of use, never the whole house. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Plot after plot, the same fitting sequence.

It is walked round rather than looked at from one side, so the direction the veining runs along it cannot be hidden against a wall the way it can on a perimeter run. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. A corner that will not close is never forced. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

Plaster thickness varies over the height of a wall, so the line at worktop height is not the line at skirting level, and the units decide which one matters. The back edge is eased in progressively rather than offered up once and forced. The notch is eased until it drops, then bonded. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Two flats with an identical layout can want entirely different things from the same run of worktop, which is why the quote follows the run rather than the address. The fitting day is arranged with whoever can actually give us access for the whole slot. Communal floors are protected the same as private ones.

Variation past what packing can take up has to be corrected in the carcasses before we cut, because the template records the units as they stand. An island is where this usually shows, standing free with no wall to level against. Units have to be fixed down as well as levelled. A loose carcass moves under stone. Two walls each a degree out give an internal corner two degrees out, and the whole of that error lands in the mitre. It adds an hour or two to the day, and that time sits in the schedule rather than being taken out of the finishing. Two millimetres at the wall is two millimetres you see.

An upstand is a slim strip that follows the worktop up the wall; a full-height splashback runs from the worktop to the underside of the wall units. Both are templated after the worktop is down and settled, because they are cut to the wall itself. Tiling and stone can meet, but where they meet is decided before the template rather than after. The boiler has usually been moved out of the main house into the addition, and its flue, its pipework and its condensate all cross the wall the run wants. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. Movement joints in the shell stay movement joints.

Nothing is measured until the sink, the tap and the hob are in the room to measure against. Upstands and splashbacks are templated after the worktop is down and settled, so they are a separate visit. The template produces a drawing, and the workshop cuts to that drawing once you agree it. Ceilings are generous and the rooms are narrow, so the runs are long, the aisle is tight and there is nowhere to stand a slab on edge. The fitting day is planned backwards from all of it, before the first piece comes off the van. The whole run is dry-fitted before any adhesive is opened.

A join sits over a cabinet gable. It never spans a gap and never runs through a cut-out. What you get is a line rather than a step, because the pieces are levelled to each other first. A join cannot cross a cut-out, so a sink mid-run takes away the position you would have used. Some of them overhang on two sides at once, and each side is worked out separately, because the load on an edge people lean against is not the load on an edge people walk past. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Pieces are carried in the order they are laid.