Skip to content

Bromley · BR2

Worktop design and quotation in Hayes

Priced from your plans or the kitchen as it stands, with every cut-out, edge and join on its own line.

Hayes kitchens

What the kitchens here are actually like

1930s detached1950s detached1960s chalet bungalowpost-war semi

Units are often only 500mm deep, so a standard 600mm stone top overhangs at the front and the doors need checking against it. Every run, cut-out, edge and join is priced on its own line, so the effect of the building is visible rather than absorbed. You can compare it against anything.

Mostly private inter-war and post-war detached with square kitchens rather than long thin ones, so the layout is usually three walls of units with a table in the middle, and clients converting to an island for the first time. Chalet bungalows near the common often have a low-ceilinged kitchen with a rear door that has to stay in place.

The square rooms here mean four separate pieces with three joints, so joint placement away from the hob cut-out matters more than in a galley.

Post-war terraces have a short straight hall to the kitchen, which is a good deal kinder than the houses they replaced. Runs are short, joins are few and the biggest single question is whether we can go in through the back — a rear door straight from the garden into the kitchen usually lets us fit long pieces whole, whereas a mid-terrace with no side gate means everything comes through the front and may need splitting. Priced from the building, not from a rate card.

The stock behind these kitchens runs to 1930s detached, 1950s detached, 1960s chalet bungalow and post-war semi. They are not interchangeable, and a worktop finds the differences quickly.

True everywhere

Worktop design and quotation, in short

  • Material is £110–£550/m² supply. That is the slab only.
  • Templating, fabrication and fitting are quoted as their own lines.
  • No installed price per square metre is published, because it is not a real number.
  • Nothing is payable until we template.

Covered from the New Malden patch. Fitted 3–7 working days from template.

period detached houses and villas

What gets asked for here

The research on this patch puts this at the top of the list, above worktop installation and worktop replacement.

period detached houses and villas

Getting stone into the room

Straightforward for the most part: driveways, dropped kerbs and side gates wide enough to take a slab round the back without going through the house.

The side passage is the measurement that matters, because a piece has to be carried flat down it and then turned in at the back door, and the turn is always tighter than the passage. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Access

Getting stone into a Hayes kitchen

Straightforward for the most part: driveways, dropped kerbs and side gates wide enough to take a slab round the back without going through the house.

Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.

3–7 working days

From template to fitted, working days from template. The same on this patch as every other.

New Malden patch

Hayes is worked from our New Malden run, covering South West London & Surrey.

We come to you

Templated in your kitchen, cut in our workshop, fitted by our own installers.

Access told straight

If the route forces an extra join, you hear that at quote stage, not on the day.

Questions

Worktop design & quotation in Hayes

If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.

Do you cover Hayes?

Yes. Hayes is on the patch, and the postcodes we work here are BR2. It is run from the New Malden side, covering South West London & Surrey. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Does the housing in Hayes change how worktop design & quotation works?

Walls look modern and are not: block or breeze with a skim that has been patched over decades, so dry-laying and scribing still apply. With little square metreage to spread them over, the cut-outs and the fixed template, fabrication and fitting lines carry the quote, so each one is listed separately rather than buried in a rate. You see it before you commit to anything. The square rooms here mean four separate pieces with three joints, so joint placement away from the hob cut-out matters more than in a galley.

How does the stone actually reach a kitchen in Hayes?

Straightforward for the most part: driveways, dropped kerbs and side gates wide enough to take a slab round the back without going through the house. The side passage is the measurement that matters, because a piece has to be carried flat down it and then turned in at the back door, and the turn is always tighter than the passage. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Is Hayes mostly worktop design & quotation work for you?

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop replacement. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly.

Why do two Hayes kitchens the same size price differently?

Three runs means two internal corners, and each corner is a decision about mitre or butt joint before anything is nested. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

What has to be finished before you can template?

Sill height gets settled with the template on site, because it is one of the few dimensions nobody has measured before we arrive. Send photographs of every corner of the room and it gets priced properly first time. Better on the quote than in a variation. Tell us whether there is side or rear access to the kitchen from outside, and send the run lengths with a photo of the window and boiler positions. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Nothing payable until template.

Next step

Worktop design and quotation in Hayes, priced properly

Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.

25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.

+44 7479 194398