Worktop design and quotation in Imperial Wharf

Yes. Imperial Wharf is on the patch, and the postcodes we work here are SW6. It is run from the New Malden side, covering South West London & Surrey. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Floor-to-ceiling glazing lights the worktop from one side all day, which shows every ripple in a polished surface and every gap at a scribe. Runs are short enough that a small U or galley often comes out of one slab with good yield, which means the material band you pick (£110-£550/m² supply only) is doing most of the work in the total, not the shape of the room. Priced from the building, not from a rate card. Sintered stone and thin porcelain are the usual upgrade here, and those need a rigid transport frame and a full set of suction lifters - they do not forgive being flexed on a long corridor carry.

Gated estate with a security barrier, contractor registration, a designated loading bay and a goods lift that must be booked and lined before use, plus estate rules on working hours. From the lift lobby the route to the flat is a long carpeted corridor across a podium, so floor protection is mandatory and the trolley run is significant. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Every line has a reason next to it.