Worktop replacement in New Southgate

Yes. New Southgate is on the patch, and the postcodes we work here are N11. It is worked on our north London run, along with the rest of Barnet. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Developer kitchens use 600mm carcasses with a chipboard top glued down, so allow time to break out the old top cleanly without damaging the units the customer wants to keep.

Industrial and railway land breaks the road pattern up, so routes are indirect; new blocks have loading bays and lifts, while the older terraces have no drives and tight permit parking near the station. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. We would rather find it at template than on the morning, which is why the templater looks behind the units. The laminate has been covering it up. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.