Worktop design and quotation in Paddington

Yes. Paddington is on the patch, and the postcodes we work here are W2. It is worked on our central London run, along with the rest of Westminster. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The room is genuinely square and the units are plumb, so the visit is more about the building than about the kitchen. With the room square and the access managed, the material band you choose does most of the work in the total. Priced from the building, not from a rate card. Concierge slots are short, so the whole slab set has to be on site in one movement - stage it kerbside first rather than making three trips to the van.

These towers run a full logistics process - book the loading bay off the estate road, a two-hour slot, ID and RAMS to concierge, protection in the lift, and no works outside 8am to 6pm weekdays. Some blocks require materials to go through a basement service corridor rather than the residential lobby. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. That is why the fitting line on a quote reflects manpower and time rather than square metres. It appears as its own line rather than buried in a rate.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Written to be read by whoever is paying.