Worktop replacement in Paddington

Yes. Paddington is on the patch, and the postcodes we work here are W2. It is worked on our central London run, along with the rest of Westminster. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Piece size is set by the lift car and the entrance dogleg, which routinely turns a two-piece kitchen into a three-piece one. The work is all in the building, not the kitchen. Units kept, surface changed, one day. Concierge slots are short, so the whole slab set has to be on site in one movement - stage it kerbside first rather than making three trips to the van.

These towers run a full logistics process - book the loading bay off the estate road, a two-hour slot, ID and RAMS to concierge, protection in the lift, and no works outside 8am to 6pm weekdays. Some blocks require materials to go through a basement service corridor rather than the residential lobby. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. Going from a 38mm laminate to 20mm or 30mm stone drops the surface, which shows against tiles, a window board and any freestanding appliance. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Units kept, surface changed.