Worktop templating in Paddington

Yes. Paddington is on the patch, and the postcodes we work here are W2. It is run from the Watford side, covering Hertfordshire & North London. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Boxed soil stacks and ventilation ducts run behind the units, and the boxing depth changes between floor level and worktop height. The room is square and the plasterboard is not, so the internal corner is recorded as it is rather than as ninety degrees. No stone is ever cut from a plan. Concierge slots are short, so the whole slab set has to be on site in one movement - stage it kerbside first rather than making three trips to the van.

These towers run a full logistics process - book the loading bay off the estate road, a two-hour slot, ID and RAMS to concierge, protection in the lift, and no works outside 8am to 6pm weekdays. Some blocks require materials to go through a basement service corridor rather than the residential lobby. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. The laser records it along with everything else. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. Units fitted, fixed and level first. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Taped internal angles in plasterboard belly at the corner, so the run picks up a few millimetres over the last 300mm and a plan-angle mitre will not close. It is recorded on the drawing with the run dimensions so the workshop is not guessing. That is why the visit takes two or three hours. Boards taped or skimmed and finished, units fixed back to the wall and levelled off, and the appliances on site - the wall must be at its final thickness on template day, so no tiler or splashback fitter gets ahead of the worktop. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come.