Worktop installation in Royal Arsenal Riverside

Yes. Royal Arsenal Riverside is on the patch, and the postcodes we work here are SE18. It is worked on our south east London run, along with the rest of Greenwich. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Boxed soil stacks and ventilation ducts run behind the units, and the boxing depth changes between floor level and worktop height. Everything comes up in the lift, so we measure the lift car's internal diagonal before the piece is loaded, because a car that takes 2.4m on the diagonal will not take a 3m worktop no matter how you stand it. That is the shape of the day. In the listed blocks you often can't chase or drill historic walls, so upstands and end supports have to be carried by the units alone.

A gated estate with a barrier, controlled vehicle access and time-limited loading arranged through estate management; the listed conversions add restrictions on what can be fixed into original brickwork. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. Rushing that is what leaves a gap you look at every morning for fifteen years. Eased in, never forced. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Floors and units are protected before anything comes through the door, communal or otherwise. One visit, our own installers.