Worktop fabrication in Royal Arsenal Riverside

Yes. Royal Arsenal Riverside is on the patch, and the postcodes we work here are SE18. It is worked on our south east London run, along with the rest of Greenwich. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Boxed soil stacks and ventilation ducts run behind the units, and the boxing depth changes between floor level and worktop height. Piece size is set by the lift car, not by the slab. Every join over a gable, clear of every cut-out. In the listed blocks you often can't chase or drill historic walls, so upstands and end supports have to be carried by the units alone.

A gated estate with a barrier, controlled vehicle access and time-limited loading arranged through estate management; the listed conversions add restrictions on what can be fixed into original brickwork. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. It is settled on the bench, not on site.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Nested for the job in front of us.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. The bench proves it before the van does. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A lightweight stud partition will not carry a breakfast bar or a peninsula end, and stone finds that out faster than laminate ever did. Internal corners are machined with a radius and polished, and kept well clear of any join or cut-out. Radiused, polished, and clear of the joins. Sink, tap and hob need to be with us before machining, along with confirmation of whether the island is getting a breakfast overhang, since anything past roughly 300mm unsupported needs steel let into the carcasses and that has to be built in, not added later. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. Dry-assembled before it leaves.