Worktop installation in Wandsworth Common

Yes. Wandsworth Common is on the patch, and the postcodes we work here are SW18, SW11, SW12. It is worked on our south west London run, along with the rest of Wandsworth. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Listing and conservation conditions apply to a good number of these, which constrains what can be altered around the kitchen rather than what goes on top of the units. The day is planned backwards from the hall, and the scribing takes longer than the carry. The slow parts are slow for a reason. Getting stone down a lightwell stair is the constraint here, not the room, measure the stair headroom and the turn radius before agreeing any single-piece island top.

Many of these houses have a lower-ground entrance via a front lightwell with a steep flight of steps and a tight turn at the bottom, the worst carry in the area. On-street parking is permit-controlled with limited visitor bays. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. We walk the route with a tape and protect it end to end before the first piece is lifted. It gets checked before the first piece is lifted.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop templating and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A second kitchen or a kitchenette in an annexe is a small job with the same fixed template, fabrication and fitting lines as a large one. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Where an annexe has been built or converted, its floor and its walls are newer than the main house and behave differently under the same run. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.