Worktop templating in Cricklewood

Yes. Cricklewood is on the patch, and the postcodes we work here are NW2. It is worked on our north west London run, along with the rest of Brent. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Permitted works hours are commonly weekdays with a late start and an early finish, so a one-day fit is planned around the porter and the lift. Mansion-block kitchens usually have a serviced riser or boxed pipework somewhere in the run, and the boxing is rarely the same depth from one end to the other, so the template takes the depth at worktop height at several points rather than one reading. Two to three hours, once the units are in. First-floor maisonette kitchens are the recurring headache: the piece has to go up a domestic staircase with a half turn, so plan the joint before quoting a single length.

The Broadway is an A road with loading restrictions and bus lanes, so vans park in side streets and the crew carries. Mansion blocks vary wildly, some with a small original lift too shallow for a full slab and a stone staircase as the only alternative. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Two to three hours on site, with the sink, tap and hob physically present. Appliances on site, not on order.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Join positions and vein direction are marked on the template drawing before it leaves site. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Boxing and riser casings built, cased and finished to their final surface, units fixed and levelled, and building access, lift booking and porter arrangements agreed so both the template visit and the later fit can run. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.