Reception counters and desks in Downham

Yes. Downham is on the patch, and the postcodes we work here are BR1, SE6. It is worked on our south east London run, along with the rest of Lewisham. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. A commercial frontage rarely has anywhere to stop, so the unload is timed rather than assumed and the counter pieces come off first. The van stays put while the carcass is being scribed to. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

An inter-war terrace is wider than a Victorian one and shallower than a semi, so the kitchen is a compact square room rather than a galley. Practices in this stock are usually converted houses on or behind an interwar parade: a dental surgery, a veterinary practice or a small office with its reception in what was the front room. The knee recess is argued over hardest where the floor is shallowest. The face of a breast is rarely flat, and a top returning onto it picks up that bow across the last few hundred millimetres of its length. A counter is worse off than a kitchen here, because it usually stands clear of the wall and has nothing behind it to hide a gap. The front edge runs straight whatever the wall behind it does.

Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. A counter top is one long piece with no run of cabinets to break it, so the route decides the join count before the sightlines get a vote. The counter is sized to the way in before it is sized to the slab. Gravel and block paving both look like hard standing and neither takes a loaded trolley, so the run from tail lift to door gets boarded. Loading bays belonging to the building are booked by whoever holds the lease, and that is seldom whoever ordered the counter. A red route puts a clock on a counter that will not be rushed.

Not really, and there is no sense dressing it up. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It gets quoted, cut and fitted exactly as it would anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Counters are nearly always one-offs, so the saving that comes from repeating a specification is not usually on the table here. A phased fit-out gets phased templating, one lobby at a time. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where an operator is fitting out several receptions, the counters come off one slab run so the desks read as a set rather than as neighbours. What the operator needs at the shelf outranks the elevation.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. A counter has the same argument in miniature: a straight run nests kindly on a slab, and every return costs yield. The return between the two levels is drawn first and cut first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Old breasts carry a bulge low down where the original opening was closed up, and the units stand off it before the stone is measured at all. What a counter is scribed to is the joiner's carcass rather than the plaster, which is why it is templated after the carcass is fixed and never before. Where the plaster bows, the counter is drawn away from it. Confirm whether the reception is at ground level or up the stair, and send the carcass drawing with the chimney breast and any bay recorded on it. Someone who expects to still be there in ten years asks different questions: how a honed finish marks, what a sealer does and does not do, and whether a chip by the sink can be repaired in place. The same split runs through commercial property: a landlord fitting out a shell and a tenant fitting out their own reception want different things from one counter. A managed lobby has rules the counter has to be carried under.

On the fitting day floors and door frames are protected, joins clamped flush, sink and hob sealed. The design and quotation visit comes first. It is free and carries no obligation. The fitting itself is one visit: a plain run is a morning, an island with splashbacks takes most of the day. Internal walls are hollow clay block or stud rather than solid brick, so two points a metre apart on the same wall want two different fixings. A reception counter answers to the building it stands in more than to the drawing, because it is fabricated to a carcass somebody else has already built and fixed. A lobby gets templated the way a kitchen never is.

Where a top takes wine, oil and lemon most days, the non-porous materials ask least of the household. Granite is porous to varying degrees, so it is sealed when we fit it and topped up over the life of the worktop. Granite tells you when the seal wants topping up: water stops beading on the surface and starts darkening it instead. There is usually a shared rear alley, and whether the gate onto it is unlocked decides whether long pieces come in from the back. The carcass is built around a chimney breast or into a bay, so the counter is drawn to a shape the joiner had to invent rather than to a rectangle, and the return between the upper counter and the transaction shelf rarely nests neatly against the long piece. Protected finishes decide the fixings before the drawing is finished.

Dark and heavily veined stone shows a join more than a pale even one, which is worth knowing before the slab is picked. What you get is a line rather than a step, because the pieces are levelled to each other first. An island often runs in one piece where a wall run cannot. Where the return runs into a wall that is out of square, the corner is templated as the angle it really is rather than as ninety degrees. The return between the high counter and the low shelf never nests neatly, and it is what decides how much slab the desk swallows. A counter join lines up with the plane above it or it gets moved.

The alternative to a join is a shorter run, which is usually the wrong thing to trade away. Hoisting through a window is occasionally the answer, and it is a decision made at the template, not improvised on the fitting day. An external stair, a side return or a rear garden counts as carry and is measured the same way. A level threshold with hard standing outside it is the one arrangement where a full run goes in without a single re-grip. The lower transaction shelf is short and easily handled; it is the upper counter that has to be walked in on edge and turned at every corner. A join forced by a doorway still lands over a carcass support.