Worktop installation in Honor Oak

Yes. Honor Oak is on the patch, and the postcodes we work here are SE23. It is worked on our south east London run, along with the rest of Lewisham. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. The carry is the constraint. The slow parts are slow for a reason. Stepped approaches off the estate roads mean the last ten metres is a stair carry with no barrow option.

Estate roads on a steep slope with parking courts and stepped front paths, and some blocks reached only from an upper road with a flight of steps down to the entrance. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The back edge is eased in progressively rather than offered up once and forced. It is the slow part of the day and it should be. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. The fitting day is arranged with whoever can actually give us access for the whole slot. One visit, our own installers.