Worktop installation in Sydenham

Yes. Sydenham is on the patch, and the postcodes we work here are SE26. It is worked on our south east London run, along with the rest of Lewisham. Where the bay sits some distance from the core, the carry across the car park is the longest leg of the day and gets boarded and lit. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A villa cut into flats leaves kitchens in rooms that were never kitchens, with services run to wherever they could physically be made to reach. The day is planned backwards from the hall. The slow parts are slow for a reason. Flat conversions above the shops are the awkward ones, a narrow stair straight off the street and no rear access at all.

The main road is busy with buses and loading restrictions, the residential streets climb steeply toward Sydenham Hill, and almost none of the terraces have off-street parking. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. It is the slow part of the day and it should be. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.