Worktop installation in Sydenham Hill

Yes. Sydenham Hill is on the patch, and the postcodes we work here are SE26. It is worked on our south east London run, along with the rest of Lewisham. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Handmade brick and lime plaster move visibly along a run, and a straight-cut back edge shows it immediately. Access through the property is usually the simplest of any archetype, with wide doors and generous rooms, so we can often carry a full-length piece straight in without a planned join. The slow parts are slow for a reason. The big-island jobs come from up here and they need a proper lift plan, a 3.2m waterfall piece over gravel is not a two-man carry.

Long private drives, steep approaches off the hill road, gravel and gated entrances, and houses sitting well above or below their gate at the end of a stepped path. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.