Kitchen worktops in Royal Albert Wharf

Yes. All recent stock, so kitchens are open-plan with a 2.6m to 3m run of handleless units and a compact peninsula, sized to a modern flat rather than a family house. Replacement work is mostly owners upgrading a builder-grade top or repairing a chipped composite around the sink. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

2016 onwards apartment block and waterside townhouse. Floor-to-ceiling glazing lights the worktop from one side all day, which shows every ripple in a polished surface and every gap at a scribe. If the diagonal is short we either split the run with a planned join or, on lower floors, carry up the stairwell, which needs the half-landing turn checking as well. That is the shape of the day.

The development sits at the end of a long approach past the dock with limited through-traffic, so allow travel time but expect a clear road at the end of it. Service access is through a courtyard with bollards and a small number of shared lifts serving several cores, which means a booking and often a wait. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Worktop replacement, worktop installation and worktop splashbacks & upstands, in that order. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Shared lifts across multiple cores make this a slow building to work in, so allow a longer window than the fit itself needs.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. Long runs almost never take a single panel, so the joint positions want agreeing before anything is templated. Joint placement is a decision, not an accident. A lightweight stud partition will not carry a breakfast bar or a peninsula end, and stone finds that out faster than laminate ever did. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.