Kitchen worktops in Shad Thames

Yes. Almost entirely converted warehouse apartments - split-level or double-height, with the kitchen run pinned along one wall between structural brick piers and cast-iron columns, so runs get broken into 1.8m to 2.4m sections rather than one continuous sweep, and breakfast bars replace full islands where the floor plate is narrow. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

1880s tea and spice warehouse, 1980s Butlers Wharf conversion and 1990s riverside block. Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. These read as easy from the outside and rarely are. That is the shape of the day.

The street itself is cobbled and shaded by the overhead gantry bridges with no room to park a van beside the door; lifts are small original goods lifts or tight passenger cars, so oversized pieces have to be planned to fit the car diagonally or go up the stairs on edge. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Worktop templating, worktop fabrication and worktop installation, in that order. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch. Measure the lift and the stair turn before you cut anything - a slab that fits the kitchen but not the lift is a wasted day here.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Measured at worktop height, nowhere else. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where the owner is not local, the decisions happen remotely, so photographs and a clear itemised drawing carry more weight than a showroom visit ever would. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.