Kitchen worktops in Victoria

Yes. A lot of the newer stock is converted or newly built above commercial space, which gives compact open-plan kitchens with a 2.6m run and a small peninsula, ventilated by a recirculating extract because there is no external wall. Older mansion flats behind the station have separate kitchens with a single long run. A dedicated loading bay or service yard is the easiest arrangement in a managed building, provided the slot is booked and someone has the key to the shutter. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised.

mansion block, office-to-residential conversion and 2010s mixed-use tower. External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. Mansion-block kitchens usually have a serviced riser or boxed pipework somewhere in the run, and the boxing is rarely the same depth from one end to the other, so the template takes the depth at worktop height at several points rather than one reading. No stone is ever cut from a plan.

Victoria Street and Vauxhall Bridge Road are red routes with no loading in the day, so deliveries are early morning into a booked bay. New buildings have a service yard with a height barrier and a dedicated goods lift that has to be reserved days ahead. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions.

Worktop replacement, worktop installation and worktop templating, in that order. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Recirculating extraction means the hob often sits under a wall unit rather than an external wall - confirm the hob cut-out clearances to the units above, they are tighter than a standard layout.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. Real angles, not plan angles. A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.