Reception counters and desks in Wimbledon

Yes. Wimbledon is on the patch, and the postcodes we work here are SW19. It is worked on our south west London run, along with the rest of Merton. A bus lane along the frontage brings its own hours with it, and stopping in one is enforced the same way the red route is. A commercial frontage rarely has anywhere to stop, so the unload is timed rather than assumed and the counter pieces come off first. Nothing is stood anywhere on a pavement it could be knocked from. There is nothing to drive to and nothing to pick up, because both visits are to the property itself.

These were built late enough to have a damp course and proper footings, so the front of the house is close to true and the rear addition holding the kitchen is the part that has dropped. The commercial work around housing of this age is shopfront: a narrow unit off a high-street parade, entered up a step, with the reception running back from the door into the depth of the plan. A parade unit is entered up a step nobody thought to measure. Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. A counter is worse off than a kitchen here, because it usually stands clear of the wall and has nothing behind it to hide a gap. Stone will not straighten joinery, and it will not forgive it either.

A communal flight is out of use while a piece is on it, so the carry is timed so nobody is trying to pass on a half-landing. A counter top is one long piece with no run of cabinets to break it, so the route decides the join count before the sightlines get a vote. Suction pads want a clean dry face, and lobby dust is not that. The van is not staying on a main road for the day, so once the stone is off it goes and parks properly somewhere else. Loading bays belonging to the building are booked by whoever holds the lease, and that is seldom whoever ordered the counter. A height barrier rules out the tail lift before it rules out anything else.

Honestly, no, though it would be easy to claim otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That says something about the housing round here, not about the work. Quote, cut and fit are the same here as on any other part of the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Counters are nearly always one-offs, so the saving that comes from repeating a specification is not usually on the table here. Several desks off one slab run, or they will not match. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where an operator is fitting out several receptions, the counters come off one slab run so the desks read as a set rather than as neighbours. The counter is the last trade in and the first thing judged.

A breakfast bar on the outer side is an overhang like any other, and the support under it is sized for people leaning on the end rather than for the weight of the stone alone. A counter has the same argument in miniature: a straight run nests kindly on a slab, and every return costs yield. Where the counter turns, the pattern turns with it. Expect £110 to £550 per square metre for material supply only, with templating, fabrication and fitting on their own lines.

Where a breast interrupts a long wall the join can often go there, so it reads as a natural break rather than a line in the middle of a worktop. What a counter is scribed to is the joiner's carcass rather than the plaster, which is why it is templated after the carcass is fixed and never before. The front edge runs straight whatever the wall behind it does. Send photographs taken walking from the pavement through the door to where the counter will stand, along with the carcass dimensions once the joiner has fixed it. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The same split runs through commercial property: a landlord fitting out a shell and a tenant fitting out their own reception want different things from one counter. The knee recess is not negotiable, whoever is signing.

A sloping floor is not the problem. The plane the unit tops finish in is. The check comes before the measuring rather than after, because the whole drawing is set out from that plane. Packing takes up small variation. It is not there to hide something that belongs in the units. The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. A lobby wall that leans shows itself along the back return, so that edge is cut to the line the wall actually takes. Where the plaster bows, the counter is drawn away from it.

A mitred join at a corner is a different job from a butt join along a run, and they are not priced the same. What you get is a line rather than a step, because the pieces are levelled to each other first. A join cannot cross a cut-out, so a sink mid-run takes away the position you would have used. A peninsula projects into circulation space, so its outer corners usually take a radius rather than a point, and that radius is agreed at template rather than assumed. The return between the high counter and the low shelf never nests neatly, and it is what decides how much slab the desk swallows. Support positions go on the drawing before the top is nested.

A full-height piece behind the hob has to allow for the extractor, so that gets settled first. Ordered later from a different batch, the match is not reliable where the two pieces meet. Upstand or splashback, the stone is cut from the same slab run as the worktop, at the same time, so the batch actually matches. The kitchen occupies the ground floor of the addition with a garden door at the far end, so there is a second way in that is narrower than the front door and a great deal shorter. The commercial work around housing of this age is shopfront: a narrow deep unit off a parade, with the reception running back from the door into the depth of the plan. Housing office counters get cleaned harder than they get used.

Tiling bonded to the wall behind usually comes away with the old top, so that wall is agreed beforehand. Take the old tops off yourself if you would rather, and the quote simply carries one line fewer. What changes is the surface. The carcasses underneath stay where they are. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. The upper counter is the longest piece on the van, so the tail lift needs the full swing radius clear on the pavement. Service yards want a name and a time, given a week out.