Worktop installation in Battersea Park

Yes. Battersea Park is on the patch, and the postcodes we work here are SW11. It is worked on our south west London run, along with the rest of Wandsworth. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. The porter has to be booked, the goods lift protected with the block's own blankets or our own boards, and communal carpet and stair runners covered from the entrance to the flat door before a single piece moves. That is the shape of the day. Peninsulas set into a structural opening need the finished opening measured after the steel is cased, because the casing adds 40 to 60mm each side that the architect's drawing ignores.

Mansion blocks have wide communal stairs but many have no lift or only a small original passenger lift, and porters restrict working hours. Flat entrance doors are often original and narrower than the corridor suggests. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A deep scribe comes out of the nest, so how far the stone has to be relieved changes which part of the slab the piece is cut from. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Have the works booking confirmed with the managing agent or porter in advance, with the lift slot and any parking permit or bay suspension in place. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.