
Wandsworth · SW11 SW8
Worktop installation in Battersea
Fitting day: protected route, back edges scribed to the real wall line, joins pulled flush, sink and hob sealed.
- 5.0from 23 Google reviews
- 25-year material · 5-year workmanship
- Fitted 3-7 working days from template
Battersea kitchens
What the kitchens here are actually like
Lath and plaster, a settled floor and a hall with a turn in it are the three things that decide how this job runs. Protection down, dry-lay, scribe, then bond: the order matters more in a difficult room than an easy one. One visit, our own installers.
The artisan cottage streets have very shallow plans where the kitchen fills the whole ground-floor rear, so a single 3m run with a slim return is the realistic maximum. Larger Victorian terraces towards the park take a rear infill with a compact island of around 2m.
Cottage kitchens here run out of headroom before they run out of width, so check the height under the stair bulkhead where the run passes beneath it.
A two-up two-down has a kitchen that was never designed to be one, so the run is short, the ceiling is low and every millimetre of depth gets argued over. The day is planned backwards from the hall. That is the shape of the day.
What we are usually templating in is Victorian artisan cottage, Late Victorian terrace, Edwardian mansion flat and 2010s riverside apartment. The differences between them show up at template, not at enquiry.
True everywhere
Worktop installation, in short
- One visit. A straightforward run is a morning; an island and splashbacks take most of the day.
- Every piece is carried in by hand, and stone does not bend.
- We seat and seal the sink and hob. We do not connect water, waste, gas or electrics.
- Floors and units are protected before anything comes through the door.
Covered on our south west London run. Fitted 3–7 working days from template.
Victorian and Edwardian terraces
What gets asked for here
Second or third on the list around here, after worktop replacement. Same visit, same bench, same crew, same lead time.
Victorian and Edwardian terraces
Getting stone into the room
Cottage streets are narrow, fully permit-controlled and parked solid, with front doors opening straight onto a 1.2m pavement. Ceilings are low and the hall is short, so a slab cannot be swung, it goes in flat and low.
Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.
Victorian and Edwardian terraces
The building, and what it does to the job
The hallway turn and the door width, which cap the longest single piece we can physically get to the kitchen regardless of what the run measures.
Access
Getting stone into a Battersea kitchen
Cottage streets are narrow, fully permit-controlled and parked solid, with front doors opening straight onto a 1.2m pavement. Ceilings are low and the hall is short, so a slab cannot be swung, it goes in flat and low.
Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.
3–7 working days
From template to fitted, working days from template. The same on this patch as every other.
south west London patch
Battersea is covered on our south west London run, along with the rest of Wandsworth.
We come to you
Templated in your kitchen, cut in our workshop, fitted by our own installers.
Access told straight
If the route forces an extra join, you hear that at quote stage, not on the day.
Questions
Worktop installation in Battersea
If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.
Do you cover Battersea?
Yes. Battersea is on the patch, and the postcodes we work here are SW11, SW8. It is worked on our south west London run, along with the rest of Wandsworth. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.
Does the housing in Battersea change how worktop installation works?
A two-up two-down has a kitchen that was never designed to be one, so the run is short, the ceiling is low and every millimetre of depth gets argued over. The day is planned backwards from the hall. That is the shape of the day. Cottage kitchens here run out of headroom before they run out of width, so check the height under the stair bulkhead where the run passes beneath it.
How does the stone actually reach a kitchen in Battersea?
Cottage streets are narrow, fully permit-controlled and parked solid, with front doors opening straight onto a 1.2m pavement. Ceilings are low and the hall is short, so a slab cannot be swung, it goes in flat and low. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.
Is worktop installation common in Battersea?
It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly.
Why do two Battersea kitchens the same size price differently?
Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.
What has to be finished before you can template?
The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.
Related
More around Battersea
Other work we do in Battersea
Next step
Worktop installation in Battersea, priced properly
Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.
25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.