Worktop design and quotation in Eastcote

Yes. Eastcote is on the patch, and the postcodes we work here are HA5, HA4. It is run from the High Wycombe side, covering Buckinghamshire & Berkshire. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Wide doorways and level thresholds mean full-length pieces go in whole and the join count comes down to slab length alone. Slab yield rather than floor area is what moves the material line, and the return piece is usually the reason. Priced from the building, not from a rate card. Seating overhangs past 300mm need steel flat bar or a ply subframe, because the 20mm engineered stone people ask for will not cantilever on its own.

Wide leafy roads with in-and-out drives. The Field End Road parade is the only pinch point and its bays are time-limited. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop fabrication. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A deep scribe comes out of the nest, so how far the stone has to be relieved changes which part of the slab the piece is cut from. Send photographs of every corner of the room and it gets priced properly first time. Better on the quote than in a variation. Send the extension drawing or the unit layout with the actual appliance model numbers, since cut-out sizes come from the appliance, not the cabinet. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Every line has a reason next to it.