Worktop templating in Fairlop

Yes. Fairlop is on the patch, and the postcodes we work here are IG6. It is run from the Essex side, covering Essex & East London. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. It goes on the job sheet for the fitting crew. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Walls are dense block or in-situ concrete with a bonded plaster, so the bottom course of tiles brings plaster with it when the old top comes off. Carcass heights are read individually, since legs bottoming out on concrete mean the units do not share one plane. Two to three hours, once the units are in. The recurring issue here is water damage in the sink base from the old top, so we check the carcass is still sound before we sit stone on it.

Open modern layouts with driveways, turning space and no restrictions, so the van parks on the plot. Garages and side gates give a second route in if the hallway is tight. Garden routes carry their own hazards: a drain cover, a step up to a patio, wet decking, or a lawn that will not take a loaded trolley. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Two to three hours on site, with the sink, tap and hob physically present. The room as it is, not as it was drawn. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Two to three hours on site, with the sink, tap and hob physically present. The room as it is, not as it was drawn.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Join positions and vein direction are marked on the template drawing before it leaves site. One datum for the whole room. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. It is recorded on the drawing with the run dimensions so the workshop is not guessing. That is why the visit takes two or three hours. Every base unit fixed to the wall, packed and levelled with the laser, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A template booked hopefully around another trade is the commonest cause of a wasted visit. Appliances on site, not on order.