Skip to content

Hammersmith and Fulham · W6

Worktop installation in Hammersmith

Fitting day: protected route, back edges scribed to the real wall line, joins pulled flush, sink and hob sealed.

  • 5.0from 23 Google reviews
  • 25-year material · 5-year workmanship
  • Fitted 3-7 working days from template

Hammersmith kitchens

What the kitchens here are actually like

Victorian terraceGeorgian riverside terrace by the bridge1960s-70s tower and slab blockrecent town centre apartment scheme

Nothing in a house of this age is square, and the kitchen is usually the part that has been altered most often. The fitting day is planned backwards from all of it, before the first piece comes off the van. The route is walked before the first lift.

Away from the gyratory the stock is standard two-bay Victorian terrace with a rear kitchen, and the common job is a side-return infill giving an L of about 3.4m by 2.4m with an island where the old boundary wall was.

Riverside Georgian houses near the bridge are a different animal - small rooms, uneven floors and kitchens of 2.4-2.8m that have to work around original panelling. The gyratory and the flyover approach are red-route controlled with no stopping, so the van goes onto the residential streets and the crew walks the last stretch.

The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. Walked, measured, protected, then lifted.

What turns up on the job sheets is Victorian terrace, Georgian riverside terrace by the bridge, 1960s-70s tower and slab block and recent town centre apartment scheme. The differences between them show up at template, not at enquiry.

True everywhere

Worktop installation, in short

  • One visit. A straightforward run is a morning; an island and splashbacks take most of the day.
  • Every piece is carried in by hand, and stone does not bend.
  • We seat and seal the sink and hob. We do not connect water, waste, gas or electrics.
  • Floors and units are protected before anything comes through the door.

Covered on our west London run. Fitted 3–7 working days from template.

Victorian and Edwardian terraces

What gets asked for here

It is on the shortlist for this patch rather than at the top of it, because worktop templating comes up more often. Nothing about the process differs between the two.

Victorian and Edwardian terraces

The building, and what it does to the job

The hall newel post is the usual failure point on a Victorian terrace - offer the template board up the hall before you commit to a single-piece island.

Victorian and Edwardian terraces

Getting stone into the room

Terraced streets here mostly have front gardens with a gate and a step, and the standard route in is the hallway past the stair newel, which is where longer pieces get stopped.

Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is.

Access

Getting stone into a Hammersmith kitchen

The gyratory and the flyover approach are red-route controlled with no stopping, so the van goes onto the residential streets and the crew walks the last stretch. Terraced streets here mostly have front gardens with a gate and a step, and the standard route in is the hallway past the stair newel, which is where longer pieces get stopped.

Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.

3–7 working days

From template to fitted, working days from template. The same on this patch as every other.

west London patch

Hammersmith is covered on our west London run, along with the rest of Hammersmith and Fulham.

We come to you

Templated in your kitchen, cut in our workshop, fitted by our own installers.

Access told straight

If the route forces an extra join, you hear that at quote stage, not on the day.

Questions

Worktop installation in Hammersmith

If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.

Do you actually work in Hammersmith, or just list it?

Yes. Hammersmith is on the patch, and the postcodes we work here are W6. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

What is different about worktop installation in Hammersmith?

The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. The slow parts are slow for a reason. The hall newel post is the usual failure point on a Victorian terrace - offer the template board up the hall before you commit to a single-piece island.

Is access a problem in Hammersmith?

The gyratory and the flyover approach are red-route controlled with no stopping, so the van goes onto the residential streets and the crew walks the last stretch. Terraced streets here mostly have front gardens with a gate and a step, and the standard route in is the hallway past the stair newel, which is where longer pieces get stopped. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

Is worktop installation common in Hammersmith?

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly.

What decides the price of a worktop in Hammersmith?

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

What do I need to sort out first?

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.

Next step

Worktop installation in Hammersmith, priced properly

Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.

25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.

+44 7830 847489