Kitchen worktops in Hammersmith

Yes. Away from the gyratory the stock is standard two-bay Victorian terrace with a rear kitchen, and the common job is a side-return infill giving an L of about 3.4m by 2.4m with an island where the old boundary wall was. Riverside Georgian houses near the bridge are a different animal - small rooms, uneven floors and kitchens of 2.4-2.8m that have to work around original panelling. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is.

Victorian terrace, Georgian riverside terrace by the bridge, 1960s-70s tower and slab block and recent town centre apartment scheme. Where the side return has been filled in, the old external wall is now an internal one and still carries its render, its gutter line and its old fixings. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. The slow parts are slow for a reason.

The gyratory and the flyover approach are red-route controlled with no stopping, so the van goes onto the residential streets and the crew walks the last stretch. Terraced streets here mostly have front gardens with a gate and a step, and the standard route in is the hallway past the stair newel, which is where longer pieces get stopped. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Worktop templating, worktop fabrication and worktop installation, in that order. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first. The hall newel post is the usual failure point on a Victorian terrace - offer the template board up the hall before you commit to a single-piece island.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.