Worktop installation in Ravenscourt Park

Yes. Ravenscourt Park is on the patch, and the postcodes we work here are W6. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original walls are thick, lime-plastered and rarely straight, which makes dry-laying and scribing the bulk of the fitting day. Access through the property is usually the simplest of any archetype, with wide doors and generous rooms, so we can often carry a full-length piece straight in without a planned join. Walked, measured, protected, then lifted. In first-floor conversions check the joists before you fit 30mm granite on a long island - old timber floors here flex enough to open a joint.

Streets are wide with plane trees and permit bays, but the District line viaduct and the park perimeter cut through the grid so approach routes are longer than the map suggests. Conversion flats have a shared front door, a straight run of stairs and a landing that is often under 1m wide, which is the practical piece-length ceiling. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. We walk the route with a tape and protect it end to end before the first piece is lifted. None of it is worked out on the doorstep.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop fabrication and worktop replacement. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. One visit, our own installers.