Worktop installation in Herne Hill

Yes. Herne Hill is on the patch, and the postcodes we work here are SE24. It is worked on our south London run, along with the rest of Lambeth. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Handmade brick and lime plaster move visibly along a run, and a straight-cut back edge shows it immediately. What costs time is the distance from where the van can park to the door, often down a long drive or across gravel, so we plan the carry with enough hands and board the route where it crosses gravel or lawn. The slow parts are slow for a reason. These are big rooms with big islands, so the carry through the hall and out to the rear is the deciding factor, measure the narrowest point on that route before agreeing a single-piece island.

The streets have front gardens and gate posts that narrow the approach, and permit parking is enforced. The area floods for events at the park and the railway bridge by the station is a bottleneck for anything arriving from the north. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.