
Hounslow · TW3
Worktop installation in Lampton
Fitting day: protected route, back edges scribed to the real wall line, joins pulled flush, sink and hob sealed.
- 5.0from 23 Google reviews
- 25-year material · 5-year workmanship
- Fitted 3-7 working days from template
Lampton kitchens
What the kitchens here are actually like
A hundred and forty years of alterations sit under the current kitchen, and the worktop is what has to sit flat on top of all of it. The fitting day is planned backwards from all of it, before the first piece comes off the van. One visit, our own installers.
1930s semis where the kitchen has been pushed out into a rear conservatory or a full-width extension. Family cooking, so double ovens, a long prep run against the back wall and often a peninsula rather than a full island.
Half-landings mean the back of the house sits at a slightly different level from the front, and a knocked-through kitchen crosses that line. The day is planned backwards from the hall, and the scribing takes longer than the carry. The slow parts are slow for a reason.
What we are usually templating in is 1930s semi, Edwardian terrace and postwar infill. Each of those behaves differently once the old top comes off.
True everywhere
Worktop installation, in short
- One visit. A straightforward run is a morning; an island and splashbacks take most of the day.
- Every piece is carried in by hand, and stone does not bend.
- We seat and seal the sink and hob. We do not connect water, waste, gas or electrics.
- Floors and units are protected before anything comes through the door.
Covered on our west London run. Fitted 3–7 working days from template.
1930s and inter-war semis
Getting stone into the room
Lampton Road is a busy through route with controlled parking either side of it. Most houses have a drive, but it is usually already holding two cars.
1930s and inter-war semis
What gets asked for here
This is the job the local stock asks for first, ahead of worktop replacement and worktop templating.
1930s and inter-war semis
The building, and what it does to the job
Conservatory-style rear extensions here have low cill heights, so check the window board clash before you set an upstand height you cannot achieve.
Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond.
The hallway turn and the door width, which cap the longest single piece we can physically get to the kitchen regardless of what the run measures.
1930s and inter-war semis
True everywhere, stated once
Installation is the day the templating either pays off or does not. Almost everything that makes it hard is a property of the building rather than the stone.
Access
Getting stone into a Lampton kitchen
Lampton Road is a busy through route with controlled parking either side of it. Most houses have a drive, but it is usually already holding two cars.
Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.
3–7 working days
From template to fitted, working days from template. The same on this patch as every other.
west London patch
Lampton is covered on our west London run, along with the rest of Hounslow.
We come to you
Templated in your kitchen, cut in our workshop, fitted by our own installers.
Access told straight
If the route forces an extra join, you hear that at quote stage, not on the day.
Questions
Worktop installation in Lampton
If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.
Do you cover Lampton?
Yes. Lampton is on the patch, and the postcodes we work here are TW3. It is worked on our west London run, along with the rest of Hounslow. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.
Does the housing in Lampton change how worktop installation works?
Edwardian terraces are wider and taller than the Victorian houses next to them, so the kitchen usually takes a full-width rear room rather than a narrow outrigger. The day is planned backwards from the hall. The slow parts are slow for a reason. Conservatory-style rear extensions here have low cill heights, so check the window board clash before you set an upstand height you cannot achieve.
How does the stone actually reach a kitchen in Lampton?
Lampton Road is a busy through route with controlled parking either side of it. Most houses have a drive, but it is usually already holding two cars. Carrying through the house means protecting the whole route first: floor boarded, banister padded, and the front door held open on a wedge rather than by hand. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.
Is worktop installation the job you do most in Lampton?
Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.
Why do two Lampton kitchens the same size price differently?
Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.
What has to be finished before you can template?
Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.
Related
More around Lampton
Other work we do in Lampton
Next step
Worktop installation in Lampton, priced properly
Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.
25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.