Worktop design and quotation in Ravensbury

Yes. Ravensbury is on the patch, and the postcodes we work here are CR4, SM4. It is worked on our south west London run, along with the rest of Merton. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A maisonette puts the kitchen on one of two levels, so an internal staircase may be part of the route as well as the communal one. The fixed lines do not shrink with the room, so on a small kitchen they are a larger share of the total than the stone. That is what the itemised lines are for. Maisonette kitchens usually back onto a shared party wall with a soil stack boxed in, and that boxing eats 150mm of the run that the plan does not show.

The Wandle and its parkland cut the area into pockets, so the drivable route to a front door is often not the obvious one on a map. Newer blocks have proper lobbies and lifts; the older maisonettes have external stair access only. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. You see that figure before we template, not after.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Nothing payable until template.