Worktop templating in Shoreditch

Yes. Shoreditch is on the patch, and the postcodes we work here are EC2A, E1, E2. It is run from the Essex side, covering Essex & East London. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. Two hours is the realistic figure. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The goods lift is generous and the flat entrance often is not, so the tightest point on the route is inside the flat rather than in the building. Exposed brick and steel is the whole job here: the brick face is not a flat plane, it moves in and out over its height and along its length, so the scribe is taken at the exact height the worktop will sit rather than off the wall generally. Recorded as it is, not as it was drawn. Big island slabs live or die on the goods lift here, and if there is not one the island gets a mitred join and the client needs telling before anything is cut.

One-way streets, weekend closures, market traffic and loading bans through the day, with permit parking enforced seven days in places. Converted buildings often have a goods lift or a loading door, which is worth confirming because the industrial stairwells are steep and open. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. It goes on the drawing with the run dimensions. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop fabrication, worktop installation and worktop design & quotation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. The drawing leaves site complete. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

An intruding steel column, a brick pier or a downstand breaks a run that would otherwise have been one clean piece. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Plotted, not estimated. Units fixed and levelled, all steelwork and brick cleaned, sealed and finished, and any boarded sections completed to final thickness so the template picks up the surface the stone will actually meet. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. The template happens when the units are in, fixed and level, whoever is fitting them. No stone is cut from a plan.