Worktop installation in St Mary Cray

Yes. St Mary Cray is on the patch, and the postcodes we work here are BR5. It is worked on our south east London run, along with the rest of Bromley. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These are built in dense concrete, so support for a peninsula or an end panel goes in with proper anchors rather than plugs. The carry is the constraint. The slow parts are slow for a reason. For maisonette stairwells we cut to fit and bring the pieces up on edge, because you cannot swing a full length round a half-landing.

Estate roads with parking bays and grass verges you cannot drive over, plus first-floor maisonettes reached by external stairs and a shared landing. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop splashbacks & upstands and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. It is the slow part of the day and it should be. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Where the owner is not local, the decisions happen remotely, so photographs and a clear itemised drawing carry more weight than a showroom visit ever would. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.