Worktop installation in Strawberry Hill

Yes. Strawberry Hill is on the patch, and the postcodes we work here are TW1, TW2. It is worked on our south west London run, along with the rest of Richmond upon Thames. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Solid brick with a render coat is firm to work against and out of plumb, so the scribe at worktop height is different from the one at plinth level. The fitting itself is slower than the carry: original plaster on the party wall and around the old chimney breast is rarely square to the run, so back scribes get cut on site, and where a return wraps into a breast recess we template that shoulder tight and ease it in. Walked, measured, protected, then lifted. Big interwar houses have solid floors that fall towards the old back door, so worktop level and floor level diverge across a 4m run - shim early.

Quiet leafy roads with in-and-out drives and space to park on the plot, but a couple of railway-side roads narrow to single file and the level crossing holds traffic; mature front trees limit where a lorry can stop. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Extended households run kitchens hard, and that pushes the specification towards granite or sintered stone rather than a light quartz. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. A second kitchen or a kitchenette in an annexe is a small job with the same fixed template, fabrication and fitting lines as a large one. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.