Worktop installation in Tottenham Green

Yes. Tottenham Green is on the patch, and the postcodes we work here are N15, N17. It is worked on our north London run, along with the rest of Haringey. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A large villa has wide doors, a generous hall and somewhere to park, so the joins that go in are chosen for layout rather than forced by the route. Access through the property is usually the simplest of any archetype, with wide doors and generous rooms, so we can often carry a full-length piece straight in without a planned join. That is the shape of the day. Deep original skirtings mean the base units stand off the wall - either scribe the top back or set the units forward consistently, but decide before you template or the run steps.

The Green sits on the High Road with bus lanes and event closures, and several of the converted buildings are listed with restrictions on fixing into original fabric. Communal entrances with a keypad and a hall that must stay clear as a fire route. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.