Worktop installation in Walthamstow Village

Yes. Walthamstow Village is on the patch, and the postcodes we work here are E17. It is worked on our east London run, along with the rest of Waltham Forest. A bay shared across a parade of shops turns over all day, so the arrival time matters more than the length of the booking does. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. Forty metres of carry changes the shape of the whole day. We come to the kitchen to template and again to fit, so there is nothing to visit and nothing to collect.

Cottage terraces have no hall to speak of and the front door opens almost straight into the room, which makes the carry easier and the protection harder. The day is planned backwards from the hall. Nothing is screwed into plasterboard and hoped for. Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Fixings find the studs or they find nothing.

Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. The fitting day is planned backwards from that point, before anything comes off the van. Protection comes up only when the last piece is inside. Building management is often the real gate rather than the bay itself, since the barrier, the shutter and the lift each need someone with a fob. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather start at seven than argue with a warden.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop replacement and worktop fabrication. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. Book us when the units exist, not when they are ordered. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Handover day is a hard stop.

An island carries its own edge detail all the way round, so a mitred 100mm apron on four sides is four mitres cut, bonded and polished before the piece ever leaves the bench. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Pieces are carried in the order they are laid. The material band is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. Rushing that is what leaves a gap you look at every morning for fifteen years. A bonded mitre goes down on one plane or not at all. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Flats bought out of managed stock keep the original kitchen dimensions long after the ownership changed, so the layout says very little about who is paying for the work. The fitting day is arranged with whoever can actually give us access for the whole slot. Communal floors are protected the same as private ones.

Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. A tap under a window board still needs room for its handle to lift, which is checked at the template. A sit-on sink and an undermounted one are different cut-outs, so which it is gets settled before the template. Waterfall ends are cut in sequence off the length either side of the top so the vein carries down the leg, and that sequence is gone the moment a piece has to be recut. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. The return is offered up last.

Granite tells you when the seal wants topping up: water stops beading on the surface and starts darkening it instead. Quartz carries resin, so a hot pan wants a trivet, while granite and sintered stone will take one without complaint. A seal is not waterproofing. It only buys time to wipe a spill up. Floors are suspended timber over a shallow void and have moved, so the units are packed and levelled before anything is set on them. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. Where the wall bellies, the top is eased in against it.

Material is quoted supply only and templating, fabrication and fitting sit on their own lines, so it is visible which part is stone and which is labour. Taking the old tops away is a line rather than an assumption, so it comes off if you do not want it. Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. The back edge is eased in progressively rather than offered up once and forced. The alcove piece is dry-laid before the run is.

Join count is a question about slab size and run length, nothing else. Veining carries through a join where both pieces come off the same slab, which is decided at nesting. What you get is a line rather than a step, because the pieces are levelled to each other first. Everything on an island is fed from underneath, extraction, a socket run, a hob and sometimes a waste, and each of them wants its hole before the top is bonded down. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Mitres are pulled together, never pushed.