Worktop installation in Wormholt

Yes. Wormholt is on the patch, and the postcodes we work here are W12. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. The carry is the constraint. That is the shape of the day. The retained nib of the old back wall is where these kitchens want a mitre, and getting that internal corner tight is what the job is judged on.

Estate layout with front gardens, low walls and gates, and reasonably wide streets, so vehicle access is easier than most of W12 - the constraint is the narrow original front door and a hall barely 900mm wide. Some properties still have the original side alley to the garden, which is the better route if the gate can come off its hinges. Rear access usually lets us fit longer pieces whole, so the join count ends up decided by the slab rather than by the building. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.