Worktop installation in Belmont

Yes. Belmont is on the patch, and the postcodes we work here are HA3. It is worked on our north west London run, along with the rest of Harrow. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The chimney breast in the corner has usually been left in place, so the run gains a return and two scribed ends. The fitting itself is slower than the carry: original plaster on the party wall and around the old chimney breast is rarely square to the run, so back scribes get cut on site, and where a return wraps into a breast recess we template that shoulder tight and ease it in. The slow parts are slow for a reason. Knock-through kitchens leave a stub of the old dividing wall, and that stub is almost never plumb, so template it rather than assume a straight line to the return.

Quiet residential roads with drives and straightforward kerbside loading, plus maisonettes over the parade shops that need an external rear staircase and a careful turn at the top. Where the van stands level with the front of the house a piece gets handled twice instead of five times, and stone breaks on handling rather than on the road. We walk the route with a tape and protect it end to end before the first piece is lifted. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional.

A peninsula is an island with one end tied to a run, which means the join between them has to be planned rather than allowed to happen. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a breast interrupts a long wall the join can often go there, so it reads as a natural break rather than a line in the middle of a worktop. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. The fitting day is arranged with whoever can actually give us access for the whole slot. One visit, our own installers.