Kitchen worktops in Brimsdown

Yes. Interwar terraces and semis where the standard job is knocking the small kitchen into the back reception to make a kitchen-diner, giving a 3.6m run along one wall and a table at the far end. Islands rarely fit - the rooms are long and narrow rather than square. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is.

interwar terrace, 1950s semi and light-industrial conversion. The chimney breast in the corner has usually been left in place, so the run gains a return and two scribed ends. Walls between the original room and the extension are frequently out of square, which affects the template but not the price; what does affect it is the appliance list, because a drop-in range, an undermount bowl and a half, a boiling tap and a separate drainer are four separately priced cut-outs. That is what the itemised lines are for.

Easiest access in the borough. Wide roads built for the industrial estate, verge parking, and most houses have a driveway or a dropped kerb, so the van can back up close to the door. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate.

Worktop replacement, worktop installation and worktop design & quotation, in that order. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. When the old dividing wall comes out you are left with a nib and a beam - agree whether the worktop dies into the nib or runs past it before templating, it changes the joint position.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. The join count is stated with its reason. A deep scribe comes out of the nest, so how far the stone has to be relieved changes which part of the slab the piece is cut from. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Priced as fabrication, not as area. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.