Kitchen worktops in Morden Park

Yes. Garage and side-return infills are the common upgrade rather than large rear extensions, producing a long thin kitchen with cabinets down one side and appliances at the cold end. Utility runs off the kitchen are frequently specified in the same material. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. It goes on the job sheet for the fitting crew.

1930s semi, 1950s council-built house and Postwar bungalow. The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. The day is planned backwards from the hall. That is the shape of the day.

Off-street parking is normal and roads are wide, so the van gets to the door. The pinch point is the side passage into an infill extension, which is often built out to within 700mm of the boundary fence. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Worktop installation, worktop templating and worktop replacement, in that order. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn. Infill extensions are frequently narrower than a standard worktop plus walkway, so confirm the finished internal width before ordering, 600mm depth plus an island is not always possible.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.