Worktop design and quotation in Sands End

Yes. Sands End is on the patch, and the postcodes we work here are SW6. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. It sits in the fitting line as time on site rather than as anything to do with the stone. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Infill plots usually put the kitchen at the back with wide doors to a small garden, and that opening is the best route in. Runs are short enough that a small U or galley often comes out of one slab with good yield, which means the material band you pick (£110-£550/m² supply only) is doing most of the work in the total, not the shape of the room. You see it before you commit to anything. In the new-build townhouses the underfloor heating manifolds sit in the utility run, so agree cut-outs and access panels with the M and E drawings before templating.

Ongoing construction across the regeneration area means temporary road layouts, contractor gates and hoarding lines that change month to month, so the approach needs confirming on the day. In finished blocks it is the standard managed routine - booked bay, goods lift, corridor protection - while the cottage streets have no loading bays and heavy resident parking. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send a floor plan with the run lengths and confirm whether the existing units and sink are staying, along with the goods lift or loading bay rules if the building has any. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Every line has a reason next to it.