Worktop installation in Sands End

Yes. Sands End is on the patch, and the postcodes we work here are SW6. It is worked on our west London run, along with the rest of Hammersmith and Fulham. Bay bookings are usually an hour or two, which is fine for unloading and no use at all as a place to leave the van for a day. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Block and beam floors with blockwork walls are true enough that the scribes are light and the joins can be pulled tight. The lift is measured before the piece is loaded, and once inside the flat the fitting is quick by comparison. That is the shape of the day. In the new-build townhouses the underfloor heating manifolds sit in the utility run, so agree cut-outs and access panels with the M and E drawings before templating.

Ongoing construction across the regeneration area means temporary road layouts, contractor gates and hoarding lines that change month to month, so the approach needs confirming on the day. In finished blocks it is the standard managed routine - booked bay, goods lift, corridor protection - while the cottage streets have no loading bays and heavy resident parking. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. The fitting day is planned backwards from that point, before anything comes off the van. None of it is worked out on the doorstep.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop fabrication and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Level has to hold across the whole room rather than along one wall, or a floor that falls end to end shows as a step where two pieces meet. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.