Surface close-up
DEKTON · DEKTON
From £300 /m²
Made to order · cut to your kitchen, fitted 5–10 working days from template
Supply only: the slab itself. Fabrication, edge profile, cut-outs, delivery and installation are quoted on top and itemised, so nothing appears at the end that you did not agree at the start.
Is it right for you
The supply rate for Daze is £300 per square metre, putting it 46th of 71 among the sintered stone we stock. The median sintered stone here is £261, so Daze sits £39 above the middle of its own range. The next sintered stone down in price is Sahara Stone at £280.
Under a downlight the veining reads crisper than it does in flat daylight, and a gloss finish will throw the pattern back at you where a matt one keeps it quiet. The finish matters as much as the colour.
Put against its own material, Daze clears the cheapest sintered stone by £190 and stops £66 short of the dearest. 18 other surfaces in the catalogue carry the same rate, across different materials, so the price alone will not choose between them. Daze is 7th by price among the 13 marble surfaces in this material.
12 other sintered stone surfaces share its marble tone, Opera at £305, Natura at £311 and Aurea Stone at £280 among them. At a similar price you could have Calacatta Breccia, a quartz at £300, which is a different material doing a different job for roughly the same money.
Pattern repeat is the thing to check before committing at this band. Printed surfaces repeat, which nobody notices on a galley run and some people notice across a wide island under good side light.
The photograph above is indicative. Screens shift colour, and batches vary, so a slab can read warmer or cooler than an image suggests. We hold offcuts of the Worktop Worx quartz collection only, so we cannot post you a piece of this one. It is ordered in by the slab, and the slab is what you would be shown before anything is cut.
At a glance
Thicknesses and slab sizes available in this colour are confirmed in writing when we quote, because stock changes. Fitted 5–10 working days from template, with a 25-year material warranty and a 5-year workmanship guarantee.
Dekton
Dekton
Excellent (nothing in it can scorch)
Effectively zero porosity
Never needs sealing
If you choose it
Send the sizes, a plan or a few photographs. A person prices it and itemises every piece, cut-out and edge.
Two to three hours for a typical kitchen. We digitally template every run, record wall run-out, unit heights and appliance positions, agree with you where the joins will fall and where the tap holes and drainer grooves go, and confirm the edge profile.
Daze is cut to that template and fitted 5 to 10 working days from template, with a 5-year workmanship guarantee.
Before you commit
The survey and the written quote cost nothing and carry no deposit. A deposit is taken when you accept and book the template, and the balance is due before installation. Every cut-out, edge and join is priced on its own line.
Up to the template visit you can cancel and we refund the deposit less anything already spent reserving material. After it, the stone is cut to your kitchen and cannot be put back, which is why we template rather than work from your measurements. Read the terms
If someone else has to agree, the quote is itemised so it can be read line by line by whoever is checking it, and we can arrange to show you the actual slab before it is cut. What the guarantees cover
Every one of these is on our Google profile under the reviewer’s own name. Nothing here is written by us, and the link goes straight to the source.
“We recently had our kitchen worktops supplied and fitted by Worktop WorX using Laurent Gold sintered stone, and we couldn’t be happier with the result. The finish, quality, and attention to detail were outstanding from start to finish. Karem was incredibly helpful throughout the whole process professional, knowledgeable, and always available to answer…”
“I used Karem’s services 5 years ago for purchasing and fitting the quartz worktop in my then brand new kitchen. The price was reasonable and the service reliable and spot on, no delays in fitting, misunderstanding or excuses. I recommended him to a friend, who also used his services and they were happy too! If I need to order new kitchen work top again,…”
“Karem did an excellent job on my kitchen. He was professional, reliable, and paid great attention to detail. The finish looks amazing and has completely transformed my kitchen. Thank you! Would highly recommend his work!”
Similar surfaces
Worth comparing two or three before you settle, because the same room can take a much darker or much busier surface than a photograph suggests.
Worth reading
Dekton
Sintered surfaces like Dekton are the most durable of the three: highly scratch and heat resistant, and thin enough to take a fine mitred edge.
Most of what we fit is 20mm or 30mm. Where you want a chunkier look, we mitre the edge (a 20mm slab folded down to give a 40mm or 60mm apron), which reads as solid stone without the weight or cost of a genuinely thick slab.
Nothing in it can scorch.
Liquids sit on the surface.
No sealant schedule, ever.
The most durable of the three materials we fit.
Thin enough to take a crisp mitre.
Next step
Send plans or photos with rough measurements and we will come back with a real number rather than a range that moves later. Free samples are available on the Worktop Worx quartz collection, though not on this one.
5.0 from 26 Google reviews · templated, fabricated and fitted by our own team across London and the Home Counties.
Worth reading next