Worktop installation in Bloomsbury

Yes. Bloomsbury is on the patch, and the postcodes we work here are WC1. It is worked on our central and north London run, along with the rest of Camden. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The flat entrance door and the internal doorways are usually tighter than the communal stairs, which is the opposite of what most people assume. The day is planned backwards from the hall. The slow parts are slow for a reason. Listed communal stairs mean carrying pieces you can hand-turn on a winder, and joins get placed where the client will see them least rather than where the layout suggests.

Inside the Congestion Charge zone with a Monday to Saturday CPZ and almost no loading bays around the squares, and Euston Road on the northern edge is a red route. Communal Georgian staircases are steep with narrow winders and cannot be marked, so protection and small pieces are the norm. A walk-up with winders at every half-landing means the piece is rested and re-gripped on the way, so the crew size goes up before the piece size comes down. The fitting day is planned backwards from that point, before anything comes off the van. None of it is worked out on the doorstep.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop replacement and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.